remote control RENAULT SCENIC 2007 J84 / 2.G Electrical Equipment - Radio Workshop Manual
Page 3 of 34
RADIO
General Information
86A
86A - 3V2 MR-372-J84-86A000$099_eng.mif
Special features of radios in the PN range:
PN0: radio with built-in display.
PN1: radio with remote display.
PN2: radio and cassette player with built-in display.
PN3: radio and cassette player with remote display.
PN4: radio and CD player with built-in display.
PN5: radio and CD player with remote display.
Notes:
●All radios are designed to control a CD changer.
●There is a special procedure for replacing the CD changer located in the dashboard front panel.
●According to the vehicle version, the remote displays may have a 24 or 30-track connector or two 15-track
connectors. This display may be built into the instrument panel.
Page 13 of 34
RADIO
Radio fault finding: Customer complaints
86A
86A - 13V2 MR-372-J84-86A000$693_eng.mif
RADIO
Radio fault finding: Customer complaints
THE RADIO BEEPS APPROXIMATELY EVERY 2 SECONDS ALP 1
THE RADIO DOES NOT WORK (NO SOUND) WHEN THE RADIO ON
BUTTON IS PRESSEDALP 2
THE RADIO DOES NOT SWITCH ON AUTOMATICALLY WHEN +
ACCESSORIES FEED IS SWITCHED ON OR SWITCHES OFF AFTER 20
MINUTESALP 3
THE RADIO IS SWITCHED ON, BUT THE DISPLAY AND SATELLITE
CONTROLS DO NOT WORKALP 4
THE PLANET WHEEL CONTROLS DO NOT WORK ALP 5
RADIO RECEPTION FAULTSALP 6
THE VOLUME DOES NOT INCREASE WITH THE VEHICLE SPEED ALP 7
LIGHTING DOES NOT CHANGE WHEN THE VEHICLE LIGHTS ARE
SWITCHED ONALP 8
NO SOUND CUT-OUT DURING CARMINAT OR HANDS-FREE KIT
MESSAGESALP 9
THE INFRARED REMOTE CONTROL DOES NOT WORK ALP 10
MR-372-J84-86A000$693_eng.mif
Page 20 of 34
RADIO
Fault finding chart
86A
86A - 20V2 MR-372-J84-86A000$792_eng.mif
The radio operates but the radio control
satellite does not.
No
Does the remote
display operate?See ALP 4
Yes
Check that the radio control satellite is
correctly connected to the display or
instrument panel (see Wiring diagrams
Technical Note, vehicle, code 1519).
Are the satellite controls connected
correctly?No Reconnect the radio control satellite and
check the system operates correctly.
Yes
Check the resistance of the radio control
satellite using a multimeter.
Are the
resistances correct?No
Using a multimeter, check the continuity
and insulation of the wiring.Replace the satellite.
Test OK?No
Yes
Check the continuity and insulation of the
connections between the radio and the
display.
Test OK?Replace the wiring between the radio and the
display or repair it if the procedure exists.
Yes
Replace the display
ALP 5 The satellite controls do not work
Page 27 of 34
RADIO
Fault finding chart
86A
86A - 27V2 MR-372-J84-86A000$792_eng.mif
ALP 10 The infrared remote control does not operate (PN6)
The infrared remote control does not
work. Check the continuity and
insulation of connections 34GH and
34GK (between the radio and
instrument panel see wiring
diagrams Technical Note, vehicle,
code 261).
No
Are the connections
sound?Replace the wiring or repair it if
the procedure exists.
Yes
Connect a multimeter to connection 34GH
and check that a voltage change occurs
when pressing the remote control.
Test OK?No Check that the battery
is sound.
Yes
Replace the radio. Test OK?No
Replace the
battery.
Yes
Replace the remote control. Connect a multimeter to
connection 34GH and check for 0V on the connection
when pressing the remote control.
Test OK?No Replace the
instrument
panel.
Yes
Replace the remote control.